Insulation Removal Services in Maryland
Need old insulation removed from your attic or crawl space? Whether it's wet, damaged or rodent-contaminated, Xanvria is a licensed insulation removal company that vacuums it out across Maryland, then gets the space ready for air sealing and new insulation.
- Attic insulation removal
- Crawl space insulation removal
- HEPA or heavy-duty vacuum cleanup
- Removal & replacement by one crew
Signs Your Insulation May Need to Come Out
- Rodent droppings, urine or nesting material
- Strong or lingering odors from the attic
- Insulation that's wet, matted or water-stained
- Flattened, thin or uneven old insulation
- Heavy dust or debris mixed into the insulation
- Planning air sealing or a full insulation upgrade
Learn more: when attic insulation needs to be removed and rodent-contaminated attic insulation.
Remove It or Add on Top?
Not every attic needs insulation removal. If your existing insulation is clean, dry and in good condition, adding more on top may be all you need, and it usually costs less.
Removal makes sense when insulation is contaminated, wet, badly damaged, or blocking the air sealing your attic needs. We'll show you what we find and explain the options in a written estimate.
Read more: can you install new insulation over old insulation?
Our Insulation Removal Services
We inspect first, then list exactly what will be removed, cleaned and replaced in your written estimate.
Attic Insulation Removal
Blown-in fiberglass and cellulose are vacuumed out into bags; batts and debris are removed by hand.
Crawl Space Insulation Removal
Wet, fallen or contaminated insulation is removed from under the home and bagged for disposal.
Rodent-Contaminated Insulation
Insulation with droppings or nesting material is removed, the space is cleaned, and accessible entry points are sealed as part of the project.
Wet & Water-Damaged Insulation
Matted or water-stained insulation is removed once the moisture source has been fixed.
Attic Cleanup After Removal
The attic is cleaned with a HEPA or heavy-duty vacuum and affected areas are sanitized when included.
Removal & Replacement
With the attic floor clear, we air seal and install new insulation to the R-value in your estimate.
Before & After Insulation Removal



Our Insulation Removal Process
Free inspection
We check the insulation type, depth, contamination, moisture signs and access.
Written estimate
A clear scope and price before any work begins.
Protection
Plastic sheeting protects the access area and living space.
Removal
Insulation is vacuumed out into bags; batts and debris are bagged by hand.
Cleanup & disposal
The space is cleaned with a HEPA or heavy-duty vacuum and removed material is hauled away.
Next steps
Air sealing and new insulation, when included in your estimate.
How Much Does Insulation Removal Cost?
Removal is generally priced based on square footage, insulation depth, material type, contamination and access, rather than a single flat rate. Insulation removal cost in Maryland depends on:
- Attic or crawl space size
- Type and depth of insulation
- Rodent contamination or moisture damage
- Access and attic layout
- Whether new insulation is installed afterward
See typical price ranges in our attic insulation removal cost guide.
Vermiculite & Older Materials
Some older Maryland homes have vermiculite or other materials that may contain asbestos. If we find material like this, we stop work in that area. You'll need to hire a qualified asbestos professional of your choice to evaluate it before removal continues.
We'll always tell you what we find before any insulation is removed.
Attic & Crawl Space Insulation Specialists
- Licensed & insured insulation contractor (MHIC #05-168337)
- 15+ years of hands-on attic and crawl space experience
- Removal, cleanup, air sealing and new insulation by one crew
- Free inspections and clear written estimates
- Honest advice, including when removal isn't needed
"Xanvria did a fantastic job dealing with our squirrels in the attic problem and replacing our old fiberglass insulation with blown in cellulose! … I absolutely would use them again."
David · Google review
"Very professional on time and committed to the job"
Harry D. · Google review
Insulation Removal Across Maryland
Xanvria is based in Millersville and provides insulation removal throughout Anne Arundel County, including Annapolis, Severna Park, Arnold, Pasadena, Glen Burnie, Crofton and Odenton, as well as Howard County, Baltimore City, Baltimore County and surrounding Maryland communities.
Anne Arundel County
Howard County
Insulation Removal FAQs
Do I need to remove old insulation before adding new?
Not always. If your existing insulation is clean, dry and in good condition, adding more on top may be enough. Removal makes sense when insulation is contaminated, wet, damaged or in the way of air sealing. We'll tell you honestly which applies to your attic.
How is attic insulation removed?
Blown-in fiberglass and cellulose are vacuumed out with a high-powered insulation removal vacuum and collected in large bags. Batts and debris are bagged by hand. This is sometimes called insulation extraction.
Is insulation removal messy?
We protect the access area and living space with plastic sheeting, and removed material goes straight into bags. When removal is done, the work area is cleaned with a HEPA or heavy-duty vacuum.
How long does insulation removal take?
Many attic insulation removal jobs are completed in one day, depending on the size of the attic, the depth of insulation and how much cleanup is needed.
How much does insulation removal cost in Maryland?
It depends on attic size, the type and depth of insulation, contamination, access and disposal. Every Xanvria estimate starts with a free inspection and a written estimate.
Do you remove rodent-contaminated insulation?
Yes. We remove insulation with droppings, urine or nesting material, clean the space and seal accessible entry points in the attic or crawl space as part of the project. We are not a pest control company; if rodents are still active, you'll need to hire a pest control company of your choice first.
What about wet or moldy insulation?
Wet insulation usually needs to come out, and the moisture source should be fixed first. We don't treat mold. If we find significant mold, we'll let you know, and you'll need to hire a qualified mold remediation company of your choice.
What if my attic has vermiculite or possible asbestos?
We stop work in that area. You'll need to hire a qualified asbestos professional of your choice to evaluate the material before removal continues.
Do you remove crawl space insulation too?
Yes. We remove wet, fallen and contaminated crawl space insulation, clean up the space, and can install new insulation or a vapor barrier afterward.
Do you install new insulation after removal?
Yes. Once the space is clean, we can air seal and install new blown-in or batt insulation to the R-value in your estimate, all by one crew.
Get a Free Insulation Removal Estimate
We'll inspect your attic or crawl space, show you what we find and recommend only the work it needs.
Licensed & insured · MHIC #05-168337 · Based in Millersville, serving Maryland
