Project spotlight · District Heights, MD

Attic Insulation Removal & Replacement in District Heights, MD

Old insulation out, air sealed, new blown-in insulation in

This District Heights home had old, uneven fiberglass batts and an attic floor full of hidden air leaks. Here's how Xanvria removed the old insulation, sealed the attic floor, prepared the eaves and installed a deep, even layer of new blown-in insulation.

New blown-in attic insulation with depth rulers in a District Heights, MD home
Project at a glance

The Project

LocationDistrict Heights, MD (Prince George's County)
ProblemOld, uneven batts, debris and exposed recessed lights
Work doneRemoval, air sealing, light covers, baffles, new insulation
New insulationBlown-in, installed to the depth marked on the rulers
Before

What We Found

The attic had old fiberglass batts that were uneven, torn in places and mixed with debris. Recessed light fixtures sat uncovered in the ceiling, and gaps around the framing were hidden under the old insulation.

Old, damaged attic insulation and debris before removal in a District Heights, MD home
Before: torn, uneven insulation and debris
Old fiberglass batts and exposed recessed lights in a District Heights attic before replacement
Before: old batts and exposed recessed lights
The work

What We Did

  1. Removed the old insulation

    The old batts and debris were removed, exposing the attic floor. Insulation removal services

  2. Air sealed the attic floor

    Gaps along the top plates, wiring and penetrations were sealed with foam sealant. Attic air sealing

  3. Protected the recessed lights

    Approved recessed-light covers were installed and sealed around the base before insulation was added.

  4. Installed baffles

    Baffles were added at the eaves to keep the soffit vents open.

  5. Blew in new insulation

    New blown-in insulation was installed evenly, using depth rulers as a guide. Attic insulation installation

  6. Final walkthrough

    We checked coverage across the attic and cleaned up before leaving.

Attic floor air sealed with foam sealant after insulation removal in District Heights, MD
Attic floor cleared and air sealed
Recessed light covers sealed and rafter baffles installed before new attic insulation
Recessed light covers sealed, baffles installed
After

The Result

A deep, even layer of new blown-in insulation across the attic floor, with baffles keeping the eaves clear and depth rulers showing the installed depth.

New blown-in attic insulation with depth rulers in a District Heights, MD home
After: full, even blown-in coverage
Blown-in attic insulation installed to the depth ruler, with baffles at the eaves
After: depth ruler and baffles at the eaves
Why it matters

Why We Did It in This Order

Removing the old insulation first gave us full access to the attic floor. That gives us better access to seal attic-floor air leaks and properly protect applicable recessed fixtures before the new insulation is installed. Once new insulation goes down, those areas are much harder to reach.

Sealing first and then insulating evenly can help reduce drafts, keep rooms more comfortable and help the new insulation perform as intended. Not sure whether your attic needs removal or just more insulation? Read can you install new insulation over old insulation?

★★★★★

"Very professional on time and committed to the job"

Harry D. · Google review

See more Xanvria reviews

Areas we serve

Serving District Heights & Prince George's County

Xanvria provides attic insulation, insulation removal and air sealing in District Heights and across Prince George's County, as well as Anne Arundel County, Baltimore City, Baltimore County and Howard County.

Common questions

Questions About This Project

Do you serve District Heights and Prince George's County?

Yes. Xanvria works in District Heights and communities across Prince George's County, as well as Anne Arundel County, Baltimore City, Baltimore County and Howard County.

Does every attic need the old insulation removed?

No. If existing insulation is clean, dry and in good condition, adding more on top may be enough. In this home, the old batts were uneven and the attic floor needed air sealing, so removal made sense. Learn more: when attic insulation needs to be removed.

Why seal the attic before adding insulation?

Once new insulation covers the attic floor, gaps around wiring, top plates and fixtures are much harder to reach. Sealing them first can help the new insulation perform better.

What are baffles for?

Baffles keep the air channels at the eaves open, so insulation can cover the edge of the ceiling without blocking the soffit vents.

How long does a project like this take?

Many removal and reinsulation projects are completed in one to two days, depending on the attic's size and scope.

Free, no-pressure inspection

Have an Attic Like This in Prince George's County?

We'll inspect your attic, show you what we find and recommend only the work it needs.

Licensed & insured · MHIC #05-168337 · Based in Millersville, serving Prince George's County and surrounding Maryland communities